www.SunWindProducts.Com Your Off-Grid, Sustainable Living,  Clean/Green Solar and Wind Energy Product Superstore

home about us contact us Learning Center
 

www.SunWindProducts.Com is dedicated to finding you all the right products at the best prices. View all our products and save time today. Also, feel free to suggest a product that you feel SunWindProducts.Com should carry.

 
Solar & Wind Kits Solar Panels Wind Turbine Kits Charge Controllers Circuit Protection Inverters
    Warranty Info Solar Incentives    
Lightning Arrestors Bus Bars Batteries Disconnects Fuses Breaker Boxes
Power Dist Block Lugs Battery Cables Transfer Switches LED Light Bulbs MC Cables
           

 

Multicontact (MC) Solar Panel Interconnect Cables & Adaptors

CONNECTING YOU TO NATURE’S POWER

 

MC Cables for Solar Panel Interconnections

MC cables are used on nearly all new panels in the 100 watt+ range except for those specifically made for off-grid/RV/Marine applications, which still use the standard junction box, such as the Kyocera KC130.

The latest NEC code requires the MC4 type (Solarline 2) latching connectors, as shown in the picture. Nearly all new solar panels use the MC4 connectors, there are only a few panels still being sold that use the MC3 type connectors - most of those were manufactured prior to 2008, but there are still some in the supply pipeline, and quite a few older systems that used them.

There are also a few of the newer panels that use the Tyco Solarlok type connectors and cables. Special order only, 3-5 days.

All MC cables are made with #10 AWG stranded UL/NEC approved RHW-2/RHH (USE-2) sunlight resistant wire.

If you are using a solar panel with MC type connectors on them for RV, marine, or other application where you need to tie into a charge controller, junction box, or array combiner, just buy ONE extender cable that is twice the total length needed and cut it in half. ** Do NOT cut the connector off the end of the solar panel cable, as that will void the manufacturers warranty.

Polarity: We cannot find any "official" notes on polarity, but all the modules we have seen use the tapered looking end as the Positive (+) and the other as the Negative on panels that come pre-wired with MC connectors.

Sample of parallel network strings

See below for a series/parallel wiring arrangement using branch connectors.

 

diagrammatic sketch for parallel connection Below

 

 

 

Youtube video with general explanation of how solar wiring works

 

MC4 connector for Solar panel male & female

TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service. The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service. Built in press tabs for easy disconnect, no tool is needed. 30A max load.  Save money, make your own connectors. No special tool needed, just crimp them on wire ends

QTY and Shipping Options 1pair, 10 pairs, 100 pairs. Contact us for odd amounts.

 

 

MC4 Crimper/Solar Crimping Tool Kits for 2.5-6.0mm2 MC3/MC4 connectors,

MC4/MC3 Crimp Tool Crimping Connector Solar PV Crimper + cable cutter +Mc4 connector

30mm max cutting and 0.9-6.0mm2 stripping function.

Feature:

Five star Solar Crimping Tool is High-precision ratchet mechanism for complete crimps;0.8 metric tons pressure at crimping face, with minimal hand effort; Interchangeable high-precision crimping die set; Top German quality.

Free Shipping

Solar Crimping Tools Parameters(MC3 and MC4 type):
Capacity:2.5-6mm2
AWG:26-10AWG
Length:270mm
Weight:0.74Kg

Stripper Parameters:

For cutting wire,30mm max. Stripping wire0.9-6.0 mm2
Automatic rebound spring
No damaging of the conductor core
Length: 165mm
Weight: 0.16Kg

 

MC4/MC3 RATCHET CRIMPER


For 2.5mm2(14AWG), 4mm2(12 and 11AWG), and 6mm2(10AWG) PV TUV solar cable

Interchangeable die

Made of carbon steel with Elastomeric handle for a Non-slip grip
Free Shipping


Actual crimping from this crimper that is tight and snug-fit.

Crimping tool designed for heavy duty use.
MC4 dies sets are tempered cast iron designed to withstand heavy duty work.

Preferred tool for solar installers.

IMPORTANT:
This crimper has been tested with 3 different crimping size cables 20 times each, and every crimp retained its curling grip to the cables and not deface the pins.

 MC3 connector pair (male and female) used for solar panel connection. It is TUV approved, UL94-V0 flame class certified with water /weather proof rubber seal. The metal pin is made from high quality machined copper and sealed tip.
30A max load
.  1, 10, or 100 pcs quantity. Drop down menu.
QTY and Shipping Options

100 pairs MC4 connector for Solar panel male & female Save money, make your own connectors. No special tool needed, just crimp them on wire ends.
Shipping Options
       
MC4 "U" F/M/M Solar Panel Cable Branch Connector
Qty and Shipping Options
MC4 "U" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options
MC4 "Y" F/M/M Solar Panel Cable Branch Connector
Qty and Shipping Options
MC4 "Y" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options

MC4 "T" F/M/M Solar Panel Cable Branch Connector

Qty and Shipping Options
MC4 "T" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "U" F/M/M Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "U" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "Y" F/M/M Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "Y" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "T" F/M/M Solar Panel Cable Branch Connector
Qty and Shipping Options
MC3 "T" M/F/F Solar Panel Cable Branch Connector
Qty and Shipping Options
8 Foot MC3 Extension Cable Male/Female
8 Foot SL1 MC3 solar panel wiring extender cable.
Shipping Options
Adaptor Cable, Male Solarline 1 to Female Solarline 2
MC3 Male to MC4 Female Adaptor Cable, Male SL1 to Female SL2
Shipping Options
50 Pairs Solar MC3-MC4 Adapter Connector with 10cm solar cable(12AWG/10AWG),USA Standard, Factory Direct, TUV certificated
Shipping Options

Twenty pairs of MC4 solar panel cable Y branch connectors

One is Female/Male/Male, the other is Male/Female/Female
, connect 2 solar panels in parallel, TUV certified,brand new

water /weather proof rubber seal that can ensure excellent electrical contact for life time service
Shipping Options quantity discounts in drop down menu
   
Adaptor Cable, Male MC4 to Female MC3
Solar Panel Adaptor Cable, Male MC4 SL2 to Female MC3 SL1
Shipping Options
6 Foot MC4 Extender Cable Male/Female
6 Foot MC4 or 2meters long, 4mm 12 awg, Extender Cable Male/Female, the larger quantities are 2m long
Shipping Options quantity discounts in drop down menue
10 Foot MC4 Extender Cable Male/Female
10 foot M/F MC4 solar panel interconnect cable
Shipping Options
30 - 32 Foot MC4 Solarline 2, Extender Cable Male/Female
If you order 1pc the lengh is 30 foot MC4 extender cable M/F, if you order 10 or more pcs, the lengh is 10 meters or 32.8ft each
Shipping Options Quantity discounts in drop down menu
50 Foot MC4 Solarline 2, Extender Cable Male/Female
50 Foot MC4 (SolarLine 2) Extender Cable
Shipping Options
100 Foot MC4 Solarline 2 Extender Cable Male/Female
100 foot MC4 solar panel wiring extender cable
Shipping Options

50 foot MC3 Generation 1 Multicontact cable M/F
Shipping Options

 

30 foot MC3 Generation 1 Multicontact cable M/F
Shipping Options
75 foot MC3 Generation 1 Multicontact cable M/F
Shipping Options

 

100 foot MC3 Generation 1 Multicontact cable M/F
Shipping Options

MC4 Latching branch Connectors for Paralleling 2 Solar Panels

SolarLine 2 Multibranch MC4 Connectors, Latching

These are used to parallel and/or to series-parallel multiple MC4 connections, such as cables from solar panels.

For most panels you will need a pair - one of each type to parallel each pair of PV panels.

Quantity discounts available in drop down menu below.

QTY and Shipping Options
Multibranch MC3 Connectors  1 pair 1f2m and 1m2f
MC3 MC3 T Branch Connectors 1 PAIR TUV

Rated IP-67 TUV Standards for solar panel branch connection

See detailed specs below:

Rated voltage 1000VDC
Rated impulse voltage 8000V
Rated insulation voltage 6000V
Rated Amp current 30A Contact material
Degree of protection IP-67
Protection Class Class II
Pollution Degree 2
Temperature Range -40 to +145 degrees
Flame class UL94-V0
Insulation material PPO/TPE/PA

Rated IP67 for water resistance. Proven and approved by UL and TUV standards

This MC3 T branch connector is rated as IP67. IP (Ingress Protection) ratings the first numeral refers to the level of dust resistance and the second numeral refers to the level of water resistance. The range IP67 rating means that the device is totally protected from dust and can be submerged in water to 1 m (3ft) for up to 30 minutes without any leakage. The ratings were set by the International Electro technical Commission.

TUV Type Approved, UL Listed
Free Shipping Quantity discounts in drop down menu

30 inch MC Solarline 1, pigtail set for J-box
MC3 cable to Terminal lug adaptors
Shipping Options
Using MC cables in solar electric systems
MC Cable Clips - Bag of 25
Cable Clips
Shipping Options bag of 15 clips
Disconnect Tools for MC4 Connectors (set of 2)
Recommended to unlatch MC4 connectors

Shipping Options
 

Kellys Cable Manager Kit - Includes (50) Pcs - Each order includes a total of (30) 1" clips, (10) 1.5" clips and (10) 3" clips. For a total of 50 cable clips
Shipping Options bag of 15 clips

 

 
 
 

 

 

plant a tree

 

 

 

solar energy